-
1. High efficiency. Conventional vacuum drying equipment uses steam for heating, which requires heating from the inside out. The slow heating speed requires a large amount of coal consumption. However, microwave vacuum drying equipment uses electromagnetic wave heating, which directly heats the inte
-
Microwave sterilization equipment is mainly used in the pharmaceutical and food industries to sterilize various small packaged food, bottled food, bottled drinks, cakes, biscuits, preserved fruit, bean products, cooked food, condiments (chicken essence, essence), flour, etc. Microwave has dual bacte
-
Question 1: What is microwave?Answer: Microwave, like radio waves, infrared rays and visible light, is an electromagnetic wave. Microwave refers to electromagnetic waves with a frequency of 300MHz-300KMHz, that is, electromagnetic waves with a wavelength between 1 meter and 1 millimeter. M
-
Responsibility and Status of Wood DryingThe waste of wood resources in China is mostly due to the non drying or improper treatment of wet wood, resulting in the degradation or even loss of use value of wood. The purpose of wood drying treatment is to: (1) prevent deformation and cracking of wood; (2
-
1. Fast heating, significant energy savingMicrowave penetrates and directly couples the heated material to achieve overall synchronous and rapid heating, significantly reducing material processing time and significantly saving energy. 2. Uniform heating, uniform tissueMicrowave can achieve uniform h
-
1. Fast drying speed. Conventional methods such as steam drying, electrothermal drying and hot air drying require more than ten hours to reduce the water content from 10% to less than 1%, while microwave drying only takes more than ten minutes; The conventional method requires six to seven hours to
-
Microwave interacts with material molecules in a rapidly changing high-frequency electromagnetic field and is absorbed to produce a thermal effect, directly converting microwave energy into thermal energy in the medium. After the microwave is absorbed by the object, the object generates heat automat
-
1. Keep the production environment dry. Microwave equipment electrical appliances are all made of metal. Due to high humidity in the workshop, the surface can be relatively wet. When the power is turned on, the moisture adhering to the surface of the metal electrical appliances can easily cause shor
-
1. According to international regulations, measured at 5cm of the cavity, the microwave leakage shall not exceed 5mw/cm²。The equipment is equipped with a hand-held microwave leak detector, and the main inspection parts include: the connection of the equipment cavity, the observation port, or the
-
Applicable to:Green-fixation/drying of agricultural and sideline products; Sterilization treatment of powder seasoning; Food expansion processing.Chemical powder, polymer, coating heating, drying treatment.Fast drying, moisture balance and shaping of solid wood furniture; Rapid drying of water-based
